14th day of work to overhaul the PUP

finally had time to get some more work on the pup. The front tred plate aluminum had been held at the curvature bend with strap ties run from underneath the front bumper all the way through the pup and down to the back bumper. This held the aluminum in place so the bend could take shape and not pull on the screws as I put them in. Today we finished securing it and pulled the straps off.

Then we took the trim pieces we had cleaned out real good and repainted with the white rust-oleum and applied new putty tape and re-positioned them onto the pup.

Now we just need to put the plastic strip back into the trim that seals the screws from the elements and caulk the exterior trim, lights and anything else that needs sealing.